Radar Level Meter is an advanced radar level measurement instrument meter, measure the maximum distance of up to 70 meters. The antenna is further optimized, the new fast microprocessor can perform signal analysis and processing a higher rate, so that the instrument is suitable for solid materials, process vessels or strong dust easy to crystallize, condensation occasions. Radar level meter antenna What features: 1, stainless steel horn antenna, no volatiles for cleaner working conditions. 2, stainless steel horn antenna plus PTFE cover, suitable for volatiles level meter procurement, dust conditions. 3, all plastics, PTFE cover the antenna with an antenna, suitable for volatile matter, dust, condensation conditions. 4, stainless steel horn antenna with a purge, purge air by compressed air, antenna suitable for serious pollution conditions. 5, plus an antenna extension tube and heat pipe can be used for ultra-high temperature conditions (such as molten steel). Compare converter used in metallurgy industry, feeding the blast furnace positions, raw materials warehouse, if site conditions relatively large dust, and slag in the presence of moisture, try to use high-frequency radar level meter use. Radar level gauge working principle and operating essentials ground radar is a special form of electromagnetic waves, radar level gauge to take advantage of the special properties of electromagnetic waves to detect good quality material level meter, the physical properties of electromagnetic waves and visible light similar spread speed equivalent to the speed of light. A frequency of 300MHz-3000GHz. Electromagnetic waves can penetrate the space steam, dust and other sources of interference, but also easy to be an obstacle, the better the larger the dielectric constant reflection or brand of meter, conductivity of the medium being measured, reflecting the effect of the echo signal will be better . Radar to higher frequencies emitted by the angle will be smaller, the energy per unit area (flux or field strength), the smaller the decay wave radar level gauge to measure the effect of better. First, the principle of radar level gauge and technical performance of radar level meter consists of: It is mainly composed of the transmitting and receiving devices, signal processors, antennas, operation panel, display, fault alarm, etc. These parts of the composition. Reflection and then transmitted to the receiver is the basic principle of radar level gauge work. Radar sensors to transmit antenna beam forms the smallest 6.8GHz radar signals. Still turn back reflection signal received by the antenna, after the radar pulse signal from the transmitter to the receiver and running time between the sensor and the surface of the medium into the distance and the relative proportion of level, only the right to use these works and some operating techniques, it does not work will cause errors to reach the final of the measurement results. _ Best brand of meter-Technology (certified) _ Level Meter provided by Changzhou Best Technology Limited. Changzhou one hundred Technology Limited (www.czbckj.com) Jiangsu Changzhou, chemical instrumentation leader, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In one hundred as a technological leader with the staff warmly welcome all inquiries negotiations to create one hundred to a better future technology.